User ID
Password

 

 

China Tariff Exclusions Expiring for 151 Products
Source
American Shipper
Post Date
10/06/2020

More than 150 products imported from China will become subject to the Section 301 additional 25 percent tariff on List 1 and List 2 goods when their exclusions expire Oct. 2. Exclusions are being exted for some products but only through Dec. 31. Importers of goods that will now be subject to this tariff.
Tariff Exclusion Decisions
The Office of the U.S. Trade Representative considered exting tariff exclusions covering 188 List 1 and List 2 goods from China. However, USTR has declined to ext 151 of these exclusions, meaning those goods will be subject to the 25 percent tariff as of Oct. 2.
USTR did approve extensions of nine List 1 exclusions and 28 List 2 exclusions. These exclusions, which must be claimed using new HTSUS 9903.88.60 (List 1) or 9903.88.61 (List 2), are available for any product that meets the specified HTSUS number or product description, regardless of whether the importer filed an exclusion request.
However, while USTR said it would consider exting these exclusions for up to 12 months, it ultimately only exted them through Dec. 31. USTR states that this shortened extension is due to ¡°the cumulative effect of current and possible future exclusions or extensions of exclusions on the effectiveness of¡± the Section 301 tariffs. USTR explains that it has granted more than 6,800 exclusion requests to date, has exted some of these exclusions, and may consider further extensions. USTR states that it will take account of the cumulative effect of exclusions in considering the possible further extension of these and other exclusions.
List 1
(1) 9030.90.4600
(2) Chemically etched dies of steel, steel-rule cutting dies, movable magnetic dies, embossing folders and plastic embossing diffusers, of a kind used in manuallypowered roller machines for etching or stenciling a single sheet of cardstock, paper, leather, flexible magnet, plastics, metallic foil, vellum, felt or fabric, such sheets measuring not more than 50.8 cm in width or length (described in statistical reporting number 8420.99.9000)
(3) Operator riding self-propelled aerial work platforms of a kind described in statistical note 1 to chapter 84 effective July 1, 2019, to December 31, 2019, or in statistical 7 note 2 to chapter 84 effective January 1, 2020, powered by an electric motor, with a load capacity not exceeding 1,400 kg (described in statistical reporting number 8427.10.8010 prior to July 1, 2019; described in statistical reporting number 8427.10.8020 effective July 1, 2019)
(4) Cement retainer assemblies with diameter of 4.5 cm or more but not exceeding 51 cm and length of 30.5 cm or more but not exceeding 72 cm, composed of cylindrical iron components, nitrile rubber seal and brass back-up rings, sui for use solely or principally with the machinery of subheadings 8430.41 or 8430.49 (described in statistical reporting number 8431.43.8060)
(5) Extrusion machines for processing rubber, twin-screw type, designed to produce inner liners for tires (described in statistical reporting number 8477.20.0015)
(6) Safety valves, of brass or bronze, containing a fusible element to automatically close the valve at a set temperature, each valued not over $5 (described in statistical reporting number 8481.40.0000)
(7) DC electric motors, of an output of less than 18.65 W, other than brushless, measuring less than 38 mm in diameter (described in statistical reporting number 8501.10.4060)
(8) DC motors, electronically commutated, three-phase, eight-pole of a kind used in HVAC tems, of an output of 750 W, valued not over $100 each (described in statistical reporting number 8501.31.6000)
(9) Combined positron emission tomography/computed tomography (PET/CT) scanners which utilize multiple PET gantries (frames) on a common base (described in statistical reporting number 9022.12.0000)¡±
List 2
(1) Elastomeric petroleum resins (CAS No. 64742-16-1) (described in statistical reporting number 3911.10.0000)
(2) Machine tool stands having leveling, stabilizing, attachment or other special features (described in statistical reporting number 8466.30.8000)
(3) Electric motors, with an output of 18.65 W or more but not exceeding 37.5 W, with attached cables, designed for use in adjusting motor vehicle seats (described in statistical reporting number 8501.10.6080) 7
(4) DC electric motors, 12 V, with an output exceeding 74.6 W but not exceeding 735 W, with lead wires and electrical connector, measuring not over 75 mm outside diameter, with a housing not over 100 mm in length and a shaft not over 60 mm in length (described in statistical reporting number 8501.31.4000)
(5) DC electric motors, 12 V, with an output not exceeding 515 W, measuring not over 95 mm in outside diameter, not over 155 mm in length and with a shaft not over 30 mm in length (described in statistical reporting number 8501.31.4000)
(6) DC electric motors, 120 V, with an output not exceeding 90 W, measuring not over 90 mm long by 35 mm wide by 35 mm high (described in statistical reporting number 8501.31.4000)
(7) DC electric motors, 13.5 V, with an output not exceeding 110 W, measuring not over 75 mm outside diameter, housing not over 120 mm long, a shaft not over 55 mm long and with a mounting flange not over 150 mm (described in statistical reporting number 8501.31.4000)
(8) DC electric motors, 230 V, with an output not exceeding 140 W, measuring not more than 45 mm in diameter and not over 100 mm in length (described in statistical reporting number 8501.31.4000)
(9) DC electric motors, 230 V, with output not exceeding 85 W, measuring not more than 90 mm in length by 35 mm in width by 35 mm in height (described in statistical reporting number 8501.31.4000)
(10) DC electric motors, 24 V, with an output not exceeding 515 W, measuring not over 95 mm in outside diameter, not over 155 mm in length and with a shaft not over 30 mm in length (described in statistical reporting number 8501.31.4000)
(11) DC electric motors, with an output exceeding 74.6 W but not exceeding 735 W, containing lead wires and an electrical connector (described in statistical reporting number 8501.31.4000)
12) DC motors with a power output exceeding 74.6 W but not exceeding 230 W, measuring less than 105 mm in diameter and 50 mm or more but not over 100 mm in length (described in statistical reporting number 8501.31.4000)
(13) DC motors, of an output exceeding 74.6 W but not exceeding 735 W, each valued not over $18 (described in statistical reporting number 8501.31.4000)
(14) Direct Current (DC) permanent magnet motors rated at 90 W or more but not over 110 W and 24 V with torque of 65 Newton meters (Nm) and 2,035 Nm, incorporating a wheel that can manually actuate a valve (described in statistical reporting number 8501.31.4000)
(15) Ground Fault Circuit Interrupters (GFCIs), Appliance Leakage Current Interrupters (ALCIs), Leakage Current Detection Interrupters (LCDIs), and Arc Fault Circuit Interrupters (AFCIs) (described in statistical reporting number 8536.30.8000)
(16) Electronic AC passive infrared (PIR) motion sensing switches (described in statistical reporting number 8536.50.7000)
(17) Bottom shelf coupler assemblies designed for use with coupling tems of vehicles of heading 8605 or 8606 (described in statistical reporting number 8607.30.1000)
(18) Buffering/cushioning front retainer plates, designed for use with buffering/cushioning tems of vehicles of heading 8605 or 8606 (described in statistical reporting number 8607.30.1000) 8
(19) Buffering/cushioning intermediate aligning and overtravel protection members, designed for use with buffering/cushioning tems of vehicles of heading 8605 or 8606 (described in statistical reporting number 8607.30.1000)
(20) Buffering/cushioning rear aligning and overtravel protection members designed for use with buffering/cushioning tems of vehicles of heading 8605 or 8606 (described in statistical reporting number 8607.30.1000)
(21) Buffering/cushioning rear structural units, designed for use with buffering/cushioning tems of vehicles of heading 8605 or 8606 (described in statistical reporting number 8607.30.1000)
(22) Buffering/cushioning retention and alignment shafts, designed for use with buffering/cushioning tems of vehicles of heading 8605 or 8606 (described in statistical reporting number 8607.30.1000)
(23) Buffering/cushioning retention caps, designed for use with buffering/cushioning tems of freight railcars of heading 8606 (described in statistical reporting number 8607.30.1000)
(24) Draft pack rear aligning and overtravel protection members, designed for use with hybrid railcar cushioning tems of freight railcars of heading 8606 (described in statistical reporting number 8607.30.1000)
(25) Follower block plates, designed for use with buffering/cushioning tems of freight railcars of heading 8606 (described in statistical reporting number 8607.30.1000)
(26) Type F knuckles, designed for use with coupling tems of vehicles of heading 8605 or 8606 (described in statistical reporting number 8607.30.1000)
(27) Digital clinical thermometers, valued not over $11 each (described in statistical reporting number 9025.19.8040 prior to July 1, 2020; described in statistical reporting number 9025.19.8010 or 9025.19.8020 effective July 1, 2020)
(28) Por, wireless enabled, electrical gas monitors (described in statistical reporting number 9027.10.2000)


Title
Source
Post Date
Visit
OTI License Revocations.. American Shipper 09/10/2021
58
Evergreen¡¯s Samsung-built EVER ACE (23,992 teu) becom.. American Shipper 09/10/2021
52
COVID threatens Chinese exports as US struggles to re.. American Shipper 09/10/2021
47
Marine Insurer Warns .. American Shipper 09/10/2021
50
Vietnam port congestion growing as COVID-19 outbreak .. American Shipper 08/03/2021
132
Hot Manhattan Markets: Influx Of Demand Spurs Deal Ac.. American Shipper 08/03/2021
73
No Section 301 Tariffs on Vietnam For Now After Curre.. American Shipper 07/26/2021
124
Port of Vancouver congestion mounts despite resumed r.. American Shipper 07/26/2021
125
Biden Administration orders crackdown on ¡®unjust fees.. American Shipper 07/26/2021
126
A fresh stimulus check may be on the way to you, than.. American Shipper 07/26/2021
88
Page : 1   2   3   4   5        [Next 5 Page]  Last Page : 53 ( 1 of 53  Total Pages )

 

 

 

Brilliant Group Logistics INC.
159 N. Central Ave. Valley stream, NY 11580
Tel : (516) 599-2406 Fax : (516) 599-0528